Showing posts with label Herd Management. Show all posts
Showing posts with label Herd Management. Show all posts

Thursday, May 12, 2022

Unique Full Service A.I.in North Texas

ZNT Cattle Co. provides a truly unique service in the North Texas area. 


  • Do you have just a couple of cows and can not justify a bull?  ZNT is the answer
  • Do you work full time, and don't have time to heat check every day?  ZNT is the answer
  • Are you a small operation that does not have facilities to work cattle? ZNT is the answer
  • Need blood drawn and mailed for pregnancy confirmation?  ZNT is the answer
Our service allows owners to just drop off their cows, pairs, or heifers, and we take care of all the synchronization shots, heat checking, and artificial insemination.  This is all usually done over an 10-13 day period.  All the owner has to do is pick up the cattle when complete.  

NO semen tank, NO PROBLEM!  Customers can have semen shipped directly to our farm where semen can be held for insemination.

Groups start every other Wednesday through the entire spring.  Contact Zane Mai to schedule your cattle.  817-233-9357 call or text

Thursday, August 24, 2017

Pre-Breeding Checklist

I know many of you are just starting the fall calving season, but as the calves hit the ground, it is never to early to start planning to re-breed those cows and heifers.  Here is a list of things that can make your fall breeding go the best it can.

For me, it can be broken down into two basic categories:  Nutrition and Health

Nutrition:  Once a cow has calved, her nutritional needs change drastically from when she was pregnant.  Your cow is now eating to provide nutrition for her recovery, along with providing all the nutritional requirements her newborn calf requires.  In most cases, these increased needs can be met by using a protein source in conjunction with the nutrients provided by grazing.  Other cases may require the use of supplemental energy and protein to meet these needs.  Proper vitamin and mineral needs can be achieved through basic supplemental feed such as range cubes, the use of injectable nutrients such as MultiMin 90, or by well-balanced mineral supplements like Concept-Aid.  The key to good conception rates is achieved by having the cattle gaining weight going into breeding season, along with allowing the cows 60-90 days post-partum to be physically and hormonally ready to breed.

Health:  The other half of the equation is making sure your cows are vaccinated annually for many of the diseases that can cause low conception rates in cows, and lower mortality in their calves.  My recommendations are to give a dose of Vira-Shield, 7-way, Stay-bred, and wormer (injectable or pour-on)  Vaccinations should be done at least 2 weeks prior to cows being set up for A.I., or being turned out with bulls.  In the South, wormer for parasites should be applied 2-3 times per year.

On top of the preparation of your cows and heifers for calving, this is the time to start evaluating your herd concerning operational goal, genetic outcomes from your current calf crop, and genetic goals for your future.  By planning ahead, you can save yourself money, and sometimes a lot of headaches trying to get semen on the perfect bull for your cow.

Best of luck with your calving season, and don't forget to contact ZNT when making plans to breed those heifers or cows you just got done calving out.

Sunday, January 15, 2012

Top Cattle Videos By ZNT

Thank you to everyone that has taken time to watch my videos. Here are the top 3 videos produced by ZNT.

#1 - Cattle Torching (5,394 views)

#2 - Heat Detection Video (2,640 views)

#3 - A.I. Gun Preparation (2,416 views )

It is getting to be time for use to put out another video. What would you like to see us do next? You can comment on this blog, or post your suggestion to my Facebook page.

Wednesday, June 23, 2010

Our Herd and Our Focus

After reading a post of "Chambero's" on www.steerplanet.com the other day, I was inspired to go out and get some candid pictures of our herd and discuss our goals and direction of our herd.
For the most part, our base cow herd is comprised of Maine and Chi influence cattle.  Even though a large portion of our calf sales each year are comprised of show prospects, the decisions we make on a daily basis is focused on traits that are good for the commercial producer and the beef industry as a whole.  We concentrate on muscle, structural soundness, fertility, maternal traits, and moderate birthweights, all in an eye appealing package.

Here are a few pictures of our two cow families, and really, they could be consided one since both JAZX Audrey 352N and CTR Sweet Success 2 are both sired by the Chiangus bull CTR Success, but it's the dam side that is the difference.

Audrey Family - from left to right: JAZX Audrey 352N, ZNT Jenna 707T (Hardcore x Audrey), ZNT Montego Bay (Jenna x Tyson), and ZNT Sandy Bay (Jenna x Tyson)

CTR Sweet Success (Sweetie) Family - from left to right:  CTR Sweet Success, ZNT American Hope 903W (Hardcore x Sweetie)

Monday, May 24, 2010

Calving in the Heat

Calving this time of year can be just as dangerous, or maybe more than calving in the winter time. Dehydration is your number one killer. 


Here are a few issues that need to be monitored closely when calving in the summer time:

1. Cows can get exhausted much faster during the calving process. A cow will give up pushing on a difficult birth faster than in cool weather, increasing the need for assistance on calves that would normally be born on their own. 


2. Shade is crucial to survival of summer born calves. Newborns will not naturally seek the shade, and cows will not always hide their calves in the shade when they go to graze. A young calf will die in the matter of hours on a hot, sunny day. Calves may require being tubed with water and/or electrolyte as much as two weeks after calving


3. Calves tend to be less vigorous when born on hot days. They may not nurse right away, and even if they do nurse, they may require a supplimental tubing of milk and water. Many times at birth, the newborn does not have enough body mass to fulfill its fluid requirements by just nursing on its own. The high temperatures can also cause a reduction in appetite, causing the calf to nurse less. 

Saturday, April 17, 2010

Spring vs. Fall Calving

As we get later into the spring calving season, the dilemma starts with "What do I do with my late calving cows?"  In this circumstance, the decision needs to be made to either try to breed the cows back quickly to get her calving with the rest of the herd, or hold her over and breed her to calve in the fall.  My first experience came about due to a bull going bad during breeding season, resulting in 23 open cows at fall preg checking.  The cows were too good to cull, and it would cost too much to hold them over a year, so breeding them for fall calves ended up being the best option.

Not always does this decision need to be made due to circumstance.  The decision to calve in the spring, fall, or both is one that needs to be made after establishing your goals.  I think the three biggest factors to take in consideration when deciding is your available market, your resources, and weather.

1.  Market:  This is a no-brainer.  If you do not have a viable market to sell your calves to, don't throw your money away.  Sometimes though, switching part or all of your herd to a different calving season can bring added value and expand your customer base.  Fall calves can open doors to a southern steer market and fall bulls can bring in customers that will not use a true yearling bull.

2. Resources: Resources can range between a lot of different factors.  It could mean your ability to segregate different ages of calves in your lot, or having multiple pastures to manage your spring and fall herd both separately and properly.  Your ability to feed cows can be a major issue.  Fall calving cows require supplemental feed int the late fall and winter months.  Cows need extra energy and protein to make up for the poor quality forage in the winter and to make up for the fact that she is lactating.  The ability to creep feed the calves is almost a must for fall calves.  All that being said, the extra money spent in the winter is made up for in the spring and summer months because the cows requirements are at their lowest, and the same amount of pasture will run more cows.  Our farm in Nebraska had a few swampy pastures with very low quality grass.  Cows with calves at side did very poorly on these pastures, but when we started putting our fall calving cows on these pastures in the summer, the cows actually gained weight.

3. Weather:  This is pretty self explanatory.  Calves in the spring require shelter from the elements and the rancher must have the ability to warm less vigorous newborns or just be able to bring the calf in due to extreme cold temperatures.  Summer and fall calves have the opposite issue to deal with.  Hot weather can cause calves to become dehydrated and die within a matter of hours.  And cows can become exhausted faster when calving in the heat.  Abundant shade is a must during summer and fall calving time.

Every type of calving program has its place.  You just have to decide which program or how many in each program is right for your operation.

Thursday, April 8, 2010

Heat Synchronizing Heifers and Cows

Before I even start this blog, I want to say that my approach is “less is more” when it comes to using hormones to A.I. cows or heifers. That being said, life is not perfect, and we can not set aside our entire life for 30-60 days to get all of our cattle A.I.ed at the perfect time. There are many different regimens that I use to synchronize, but they all include at least 2 of the following drugs: Lutalyse, Cystorelin, and CIDRs. I will highlight my 3 favorite regimens.

1. When I want to keep the cattle fairly close together, but I have some time to heat check and A.I. for several days, I use this. Heat check for 5 days and A.I. cow or heifer 12 hrs after standing heat is observed, then on Day 6, give a shot of Lutalyse to any cattle not A.I.ed and apply heat detection patch on tail head, then heat check an additional 5 days and A.I. any cattle 12 hrs after standing heat is observed. The total number of days is 11. 1/4 of the cattle only go through the chute 1 time, and the other ¾ of the cattle go through the chute 2 times and only get 1 shot of Lutalyse.

2. In times when I have more time immediately, and my working facilities are better, I use this schedule. On Day 1, I give all animals a shot of Lutalyse and apply heat detection patches to the tail heads, then heat check and A.I. all animals demonstrating estrous 12 hrs after observing them in standing heat on days 1 thru 6. All animals that did not have a detectable heat and were not A.I.ed, approximately ¼ if all animals are cycling, are given a second shot of Lutalyse, then detect and A.I. all animals 12 hrs after observed in standing heat for an additional 5 days. Total number of days is 12. ¾ of the cattle go through the chute 2 times and only receive 1 shot of Lutalyse, and the other ¼ are run through the chute 3 times and receive 2 shots of Lutalyse. This regimen is different than the typical 2 shot method because ¾ of the cattle only get one shot of Lutalyse, and more of the cattle are run through the chute less times.

3. The last method is used when a mass A.I. is planned, or a minimal number of days are available to A.I. cattle. I prefer heat checking and A.I.ing animals observed in standing heat, but sometimes it just isn't feasible. Day 1, a CIDR is applied vaginally to the heifer or cow. A shot of Cystorelin can also be administered at this time. On Day 7, the CIDR is removed, a shot of Lutalyse is injected, and the heat detection patch is applied to the tail head. At this point, cattle can either be heat checked and A.I.ed 12 hours after observing standing heat over a 5 day period, or all cattle can be mass A.I.ed 60-72 hours after the CIDR is removed.

When A.I.ing cattle, either after a natural heat or synchronized heat, I like to administer 2cc of Cystorelin at time of insemination. Another money saving tip I just learned about is cutting the heat detection patches in half, thus doubling the number of patches for the same money.


Disclaimer: Any of your prostaglandin drugs such as Lutalyse and your GnRH drugs like Cystorelin, must be prescribed by a licensed veterinarian, administered according to their label. Any extra-label use of these drugs must first be discussed and approved by a licensed veterinarian.

Saturday, April 3, 2010

A.I. vs. Natural Breeding

Calves are being born left and right, and every day we are being bombarded with advertisements for bull sales and the next great A.I. sire. So how do you decide whether to spend the extra money on a top notch herd bull or buy semen on that great looking bull in the magazine?

First off, I am not going to tell you one way is better than the other. That is up to you to decide after looking at both your goals and resources. I will give you the pros and cons of each.

A.I. Breeding
Pros:
-Gives you the opportunity to use superior genetics from a sire that you could never afford to purchase.
-When breeding season is over, you do not have a bull, or a lot of bulls to feed and keep from tearing down every fence on the property.
-Allows the ability to produce consistency withing the calf crop by using a single sire, or a similar genetic line of bulls
-Calves can be born closer together through synchronization.
-Even the smallest herds can get cows bred within budget, rather than purchasing a bull to breed 2, 3, or even 15 cows.

Cons:
-Requires cow to be handled extra, along with requiring better facilities and extra labor to get the job done.
-Time restrains if you have to hire a technician to do the A.I. ing

Natural Breeding
Pros:
-Bull does all the work, so not spending hours heat detecting each day.
-No facilities needed, cows can get bred right out in the pasture.

Cons:
-Can not match each bull to each cow, and sometimes multiple bulls need to be used to breed heifers vs. cows.
-If replacement heifers are being retained, a new or different bull is needed to breed the replacement heifers too.
-Bull must be fed and cared for, even when they are not out breeding cows.
-High quality bulls cost a lot of money vs. the cost to purchase semen from a similar A.I. sire.

Only you can determine which route to take, and really most operations use a combination of both. And to fairly compare the two, each operator needs to break down all the costs associated with both and divide it by the number of cows either being A.I.ed or by the number of cows the bull will breed. You also need to determine which bull (A.I. or bull purchased at bull sale) will take your herd closer to your goals. You are not saving money if you are going the wrong direction.

Sunday, March 28, 2010

Which Bull to Which Cow?

It is that time of year when we are all trying to pick that perfect bull that will complement our cows perfectly and move our genetics one stop closer to where we want to be.

I think the biggest mistake most breeders make when selecting bulls, is focusing too much on a single trait.  This trait could be growth, maybe milk, or as in the club calf industry, muscle.  By selecting for this one trait, you may make improvements there, but you may also be setting your herd back years in other areas.  Your goals you defined did not consist of one thing, so neither should your selection process.

So how do I do it at ZNT?  How do we consistently produce great calves with such small numbers?  First, I identify every weakness and strength for each cow.  Then I look for bulls that have the genetics to improve the weaknesses, yet still have solid genetics to maintain the cows strengths.  Lastly, I do not believe in extremes when it comes to any one trait.  Everything can be overdone.  If I have a small made cow that is loaded with muscle, I am going to look for a bull that will add size, and maybe milk and moderate birth weight.

Proven vs. unproven sires.  Each has their own place.  I like using proven sires and their proven results, but sometimes it is hard to move forward when you are looking back.  That being said, I will not use an unproven sire with no proven genetics to back him up.  Of course the unproven sire has to be phenotypically right, but he must also have the genetics behind him (proven sires and dams) that meets the goals of my herd.  And yes, that is GOALS with an "S".

Good luck everyone this breeding season.

Decision Time

Every decision made in a cattle operation is important, but one decision is bigger than any other in determining the success of your operation: "Define Your Goals". This is not just a decision that someone new to the cattle business needs to do either. It can be done at any point in the life of your business.

If you don't know where you want to go, how will you ever know what you need to do to get there? The goals can range from; a certain breed of cattle, between commercial, show, dairy, or breeding cattle, red, white, black, or rainbow colored cattle, or more specific low birth weight Angus cattle that can wean 600 lbs. steer in the mountains of Wyoming. I will say that the more specific your goals are defined, the better the daily decision making process will become. Also, as your cattle operation evolves, the goals you have set need to be evaluated and revised if necessary. Some goals may be too aggressive, some not challenging enough, and some may not be able to be accomplished with the current resources available, be it pasture available, time, or in some cases financially.

Once your goals are defined, then you can begin making decision on which cow to buy, which replacement heifers to keep, or which bulls to breed your cows too. It may even mean which cows to cull. Some people have been so drastic as to completely sell out, and start over. None of these choices can be accurately made without GOALS.

Gotcha' thinking now!